Citation

Suter AH. AIHA J. (Fairfax, Va) 2002; 63(6): 768-789.

Copyright

(Copyright © 2002, American Industrial Hygiene Association)

DOI

10.1080/15428110208984768

PMID

unavailable

Abstract

More than one-half million construction workers are exposed to potentially hazardous levels of noise, yet federal and state Occupational Safety and Health Administration (OSHA) programs provide little incentive to protect them against noise-induced hearing loss. Construction noise regulations lack the specificity of general industry noise regulations. In addition, problems that characterize the construction industry, such as worker mobility and the large proportion of small businesses, make implementing hearing conservation measures more difficult. The apparent severity of exposure depends greatly on the measurement method, with the 3-dB exchange rate almost always showing higher average exposure levels than the 5-dB (OSHA) rule. Construction workers demonstrate hearing threshold levels that generally conform to those expected in manufacturing. The prevalence of hearing protection device (HPD) use among U.S. construction workers is very poor, partly because of perceived difficulties in hearing and understanding speech communication and warning signals. In addition, masking by noise of necessary communication and warning signals is of particular concern in construction, where recent research demonstrated the association between fatalities and the failure to hear reverse alarms. Judicial use of HPDs is of the utmost importance, along with avoiding overattenuation, selecting HPDs with uniform attenuation, and using noise-attenuating communication systems when possible. A successful hearing conservation program in British Columbia can serve as a model for the United States, with a long-standing positive safety culture, a high percentage of HPD use, improvement in average hearing threshold levels over the last decade, and a centralized record-keeping procedure, which helps solve the problem of worker mobility. However, controlling construction noise at the source is the most reliable way to protect worker hearing. U.S. manufacturers and contractors should benefit from the activities of the European Community, where noise control and product labeling in construction has been carried out for more than 20 years.

Language: en