Citation

Wang D, Lee YS, McFarland DM, Bergman LA, Vakakis AF. Veh. Syst. Dyn. 2009; 47(10): 1183-1204.

Copyright

(Copyright © 2009, Informa - Taylor and Francis Group)

DOI

10.1080/00423110802531083

PMID

unavailable

Abstract

The aim of this study is to investigate the ability of an essentially nonlinear vibration absorber to mitigate the large accelerations transmitted to a passenger compartment of a vehicle which is subjected to shock-type transient loading at the chassis. For such problems, the induced vibration typically attains its maximum value shortly after the application of the loading; thus, it may be impossible to dissipate a major portion of the input energy prior to the occurrence of the peak response. Here, a class of absorbers possessing a form of discontinuous essential stiffness nonlinearity is employed to achieve the desired mitigation. In this paper, we apply a single vibro-impact (VI) absorber to the chassis and examine whether the resulting energy transfer mechanism is an effective way to reduce the peak value of the inertial force measured at the passenger compartment. The influence of the absorber parameters is first studied based on a practical impulsive force, and the optimal design of the absorber is then obtained. Next, an asymmetric clearance arrangement of the absorber is suggested to facilitate the mitigation. Finally, an impulsive acceleration excitation is applied to the system to examine the robustness and efficacy of the optimised absorber. Results of numerical simulations demonstrate that a properly designed VI absorber can significantly decrease the maximum inertial force at the passenger compartment, generated by external impulsive excitations.