Citation

Stein RB, Zehr EP, Lebiedowska MK, Popović DB, Scheiner A, Chizeck HJ. IEEE Trans. Rehabil. Eng. 1996; 4(3): 201-211.

Affiliation

Division of Neuroscience, University of Alberta, Edmonton, Canada.

Copyright

(Copyright © 1996, IEEE (Institute of Electrical and Electronics Engineers))

DOI

unavailable

PMID

8800224

Abstract

Methods are described for estimating the inertia, viscosity, and stiffness of the lower leg around the knee and of the whole leg around the hip that are applicable even to persons with considerable spasticity. These involve: 1) a "pull" test in which the limb is slowly moved throughout its range of motion while measuring angles (with an electrogoniometer) and torques (with a hand-held dynamometer) to determine passive stiffness and 2) a "pendulum" test in which the limb is moved against gravity and then dropped, while again measuring angles and torques. By limiting the extent of the movement and choosing a direction (flexion or extension) that minimizes reflex responses, the mechanical parameters can be determined accurately and efficiently using computer programs. In the sample of subjects studied (nine with disability related to spinal cord injury, head injury, or stroke, and nine with no neurological disability), the inertia of the lower leg was significantly reduced in the subjects with disability (p < 0.05) as a result of atrophy, but the stiffness and viscosity were within normal limits. The values of inertia were also compared with anthropometric data in the literature. The identification of these passive parameters is particularly important in designing systems for functional electrical stimulation of paralyzed muscles, but the methods may be widely applicable in rehabilitation medicine.

Language: en