Citation

Stempfhuber W. Geod. Cartograf. 2008; 34(3): 83.

Copyright

(Copyright © 2008, Vilnius Gediminas Technical University, Publisher Walter de Gruyter)

DOI

10.3846/1392-1541.2008.34.83-87

PMID

unavailable

Abstract

Over the last two decades terrestrial and global 3D measurement sensors in the field of engineering geodesy have seen a significant upturn. With modern measurement techniques, a 3D trajectory of a moving object can be determined within a few centimetres (mostly with Global Navigation Satellite Systems, GNSS), under certain circumstances and with an overall understanding of the applied method accuracies of within 5 to 10 millimetres can be achieved (tracking total station). New application areas have been now created in the fields of construction, mining and agriculture. The guidance or control of heavy machinery demands a navigation sensor with an appropriate measurement rate and accuracy, as well as stable and reliable performance. The 3D position, together with the orientation as well as the long and cross inclination information is hereby just one part of the absolute machine guidance or control unit. Data collection, verification, management and interaction of the position information with the 6 degrees of freedom, together and the machine controller, are needed for the overall system. Rotation ring sensors for height control or height guidance are well-known amongst construction jobs and have been in use for more than 20 years. The first GPS-based guidance system for yield mapping was used 15 years ago (Auernhammer 1995). Optimization and improvements in efficiency are the principal reasons for the current developments in the area of 3D-based machine control and guidance. This paper will describe the state-of-the-art and general approaches as well as the real-time 3D measurement techniques in construction and agriculture environment.