Citation

Cheng WL, Itoh S, Jen KC, Moatamedi M. Int. J. Crashworthiness 2007; 12(1): 57-65.

Copyright

(Copyright © 2007, Informa - Taylor and Francis Group)

DOI

unavailable

PMID

unavailable

Abstract

A new analytical impact/penetration model has been developed for high-velocity impact of thick composite targets using a spring-mass equivalent energy dissipating finite element/finite difference scheme. The initial basic model includes energy dissipating mechanisms such as punching shear and fiber breakage. The impact/penetration law, which is based on a linear distribution of punching shear force, is represented by a stiffness parameter. The equivalent variable mass of the composite target is built into the model by considering two-dimensional shear wave propagation, and its effective stiffness was initially represented by a nonlinear spring stiffness that is obtained from analyzing an infinite hollow cylinder subjected to internal in-plane shear. The two stiffness parameters are characterized by analyzing the forces between the impactor and the composite target at increasing depths of penetration through a series of quasi-static finite element analyses. Results are used to provide a more accurate prediction if the impactor would perforate or stop, and to obtain an estimate of its exit velocity or the depth of penetration for both blunt-ended and sharp-ended impactors penetrating a thick composite target at high speed. Analyses were performed to demonstrate different high-velocity impact scenarios.

Language: en