Citation

Zhang S, Liu X, Deng G, Ou J, Yang E, Yang S, Li T. Sensors (Basel) 2023; 23(11).

Copyright

(Copyright © 2023, MDPI: Multidisciplinary Digital Publishing Institute)

DOI

10.3390/s23115301

PMID

37300028

PMCID

PMC10256023

Abstract

The vehicle particle model was built to compare and analyze the effectiveness of three different collision avoidance methods. The results show that during vehicle high-speed emergency collision avoidance, lane change collision avoidance requires a smaller longitudinal distance than braking collision avoidance and is closer to that with a combination of lane change and braking collision avoidance. Based on the above, a double-layer control strategy is proposed to avoid collision when vehicles change lanes at high speed. The quintic polynomial is chosen as the reference path after comparing and analyzing three polynomial reference trajectories. The multiobjective optimized model predictive control is used to track the lateral displacement, and the optimization objective is to minimize the lateral position deviation, yaw rate tracking deviation, and control increment. The lower longitudinal speed tracking control strategy is to control the vehicle drive system and brake system to track the expected speed. Finally, the lane changing conditions and other speed conditions of the vehicle at 120 km/h are verified. The results show that the control strategy can track the longitudinal and lateral trajectories well and achieve effective lane change and collision avoidance.

Language: en

Keywords

automobile; collision avoidance; lane change; MPC; multi objective optimization