SAFETYLIT WEEKLY UPDATE

We compile citations and summaries of about 400 new articles every week.
RSS Feed

HELP: Tutorials | FAQ
CONTACT US: Contact info

Search Results

Journal Article

Citation

Liu Y, Pei X, Guo X. SAE Int. J. Veh. Dyn. Stab. NVH 2022; 7(1): 10-07-01-0004.

Copyright

(Copyright © 2022, Society of Automotive Engineers)

DOI

10.4271/10-07-01-0004

PMID

unavailable

Abstract

As the basic function of the active safety configuration of a vehicle, the anti-lock braking system will compromise the driving safety if it fails. Based on the self-designed electro-hydraulic braking system, this article proposes an anti-lock brake redundant control architecture. The electro-hydraulic braking system is mainly composed of four parts: a brake pedal unit, a hydraulic drive unit, a brake execution unit, and a control unit. The mechanical structure is compact and exquisite, and the system has the function of precise and adjustable hydraulic pressure. The control architecture adopts a hierarchical control design, which is mainly composed of an upper wheel slip rate controller and a lower hydraulic pressure controller. Both the upper and lower controllers use a sliding mode variable structure control to improve the robustness and accuracy of the control. The upper slip rate controller outputs the desired master cylinder hydraulic pressure with the optimum slip rate of the rear wheels of the vehicle as the control target. The lower hydraulic pressure controller outputs the desired torque of the motor with the desired master cylinder hydraulic pressure as the target and achieves hydraulic pressure regulation of the master cylinder by controlling the motor motion. To verify the effectiveness of the algorithm, co-simulation and a hardware-in-the-loop test platform are built. Anti-lock braking tests are carried out under different typical working conditions: low-adhesion road, high-adhesion road, butt road, and split road. The results show that when the anti-lock braking system fails, the redundant control algorithm can achieve effective slip rate control under different driving road conditions and meets the anti-lock brake redundant control requirements. This study provides a reference for the development of low-cost anti-lock braking redundancy functions for vehicles equipped with electro-hydraulic braking systems.


Language: en

NEW SEARCH


All SafetyLit records are available for automatic download to Zotero & Mendeley
Print