Citation

Wang H, Chen B, Wang Y, Pang Z, Pan J, Wu H, He W. ACS Appl. Mater. Interfaces 2023; ePub(ePub): ePub.

Copyright

(Copyright © 2023, American Chemical Society)

DOI

10.1021/acsami.2c22819

PMID

36854049

Abstract

The development of energetic materials with both high energy and high safety has always been the focus of the field of energetic materials. In this paper, a low-current-sensitivity flexible energetic film composed of carbon nanofibers (CNFs)-coated Al/CuO metastable intermolecular composites (MICs) was prepared by a blow-spinning combined with controlled heat treatment technique. Hotspots can hardly generate in this kind of energetic film due to the increased electrical and thermal conductivity, leading to low sensitivity of MICs. It evenly stays at a high voltage (60 V) for 24 h without raising the temperature significantly. The energetic films keep the high energy release of MICs due to the additional violent reactions between CuO and CNFs as well as the light weight of CNFs, showing the heat release of 2864 J/g. In addition, the obtained films exhibit good mechanical properties and can maintain the structural integrity after 1000 cycles of repeated bending to a 6 mm curvature radius. The above characteristics reveal that energetic films presented in this paper have certain safety, high energy, and flexibility and have potential applications in transient electronics with flexible requirements such as micro-electromechanical system.

Language: en

Keywords

blow spinning; energetic materials; flexible materials; metastable intermixed composites; nanofiber