Citation

Radaei MR, Erami MH. Amirkabir J. Civil Eng. 2022; 54(4): e7207.

Copyright

(Copyright © 2022, Amirkabir University of Technology)

DOI

10.22060/ceej.2021.19590.7207

PMID

unavailable

Abstract

In recent decades, due to the increasing use of pipelines to transport a variety of fluids, the need to analyze and evaluate these lines at the crossing faults has increased. In this regard, many numerical studies have been carried out on buried pipes crossing faults. In most models used in previous researches, the selected characteristics for creating models were based on researchers' experiences. Therefore, naturally, the numerical results obtained from the FE analysis can be non-economic or erroneous.On the other hand, common regulations and standards for designing pipelines require special conditions and criteria in this field. Therefore, in this study, based on the existing bylaws in this field, the effect of selective pipe length and soil behavioral model on the accuracy of ABAQUS software model results has been investigated. In this regard,first, the results of two models of buried 56 inch steel pipeline with two different lengths and other similar conditions and then Under other same and purely different conditions in terms of soil behavior model,The response of the buried 56 inch pipeline crossing strike-slip fault was the basis of comparison. Finally, the review of the results shows that the unanchored length of the pipe is better to simulate longitudinal dimension of the pipeline. Also, the behavioral model of CAP plasticity was selected as a suitable model to simulate soil behavior due to the approximation of the results with the relations of the regulations

Language: fa