Citation

Sakhare RS, Desai JC, Mathew JK, McGregor JD, Bullock DM. J. Transp. Technol. (Irvine, Calif.) 2021; 11(2): 157-167.

Copyright

(Copyright © 2021, Scientific Research Publishing)

DOI

10.4236/jtts.2021.112010

PMID

unavailable

Abstract

Work zone safety continues to be one of the important focus areas for transportation agencies. Previous studies have identified that vehicle speed and lighting conditions are significant risk factors impacting work zone safety. This study evaluated the impact of the use of presence lighting and digital speed limit trailers on nighttime motorist speeds using commercially available connected vehicle speed data. Geospatial analysis was conducted on over 500,000 connected vehicle records to linear reference nearly 18,000 records from 195 unique trajectories to study section during the study period of 2 days.

RESULTS showed that median speeds reduced by 4 to 13 mph from 11PM to 7AM during the deployment of presence lighting and speed limit trailers compared to base conditions. A Kolmogorov-Smirnov (KS) statistical test comparing 105 vehicles traveling through the construction zone with presence lighting and speed limit trailers with a group of 90 vehicles during base condition indicated the speeds during the deployment of presence lighting and speed limit trailers were lower than the base condition. Also, increased compliance with the 55 mph speed limit was observed when the presence lighting and digital speed limit trailers were deployed. However, there were two hours (3AM to 5AM) where speeds increased by 0 - 4 mph, perhaps due to the low volume at that hour. The encouraging results support the further deployment of presence lighting and speed limit trailers in nighttime construction zones for reducing vehicle speeds. Those future deployments should be monitored with connected vehicle speeds to collect additional data to broaden the evaluation of these speed mitigation techniques over a diverse set of construction zone activities.

Language: en