Citation

Cai Z, Huang X, Xia Y, Li G, Fan Z. Appl. Bionics Biomech. 2020; 2020: e2348064.

Affiliation

Daping Hospital, Army Medical University, Chongqing, China.

Copyright

(Copyright © 2020, Hindawi Publishing)

DOI

10.1155/2020/2348064

PMID

32148559

PMCID

PMC7049849

Abstract

The mechanism of Behind Helmet Blunt Trauma (BHBT) caused by a high-speed bullet is difficult to understand. At present, there is still a lack of corresponding parameters and test methods to evaluate this damage effectively. The purpose of the current study is therefore to investigate the response of the human skull and brain tissue under the loading of a bullet impacting a bullet-proof helmet, with the effects of impact direction, impact speed, and impactor structure being considered. A human brain finite element model which can accurately reconstruct the anatomical structures of the scalp, skull, brain tissue, etc., and can realistically reflect the biomechanical response of the brain under high impact speed was employed in this study. The responses of Back Face Deformation (BFD), brain displacement, skull stress, and dura mater pressure were extracted from simulations as the parameters reflecting BHBT risk, and the relationships between BHBT and bullet-proof equipment structure and performance were also investigated. The simulation results show that the frontal impact of the skull produces the largest amount of BFD, and when the impact directions are from the side, the skull stress is about twice higher than other directions. As the impact velocity increases, BFD, brain displacement, skull stress, and dura mater pressure increase. The brain damage caused by different structural bullet bodies is different under the condition of the same kinetic energy. The skull stress caused by the handgun bullet is the largest. The findings indicate that when a bullet impacts on the bullet-proof helmet, it has a higher probability of causing brain displacement and intracranial high pressure. The research results can provide a reference value for helmet optimization design and antielasticity evaluation and provide the theoretical basis for protection and rescue.

Copyright © 2020 Zhihua Cai et al.

Language: en