Citation

Park JH, Jung HK, Lee JR. Materials (Basel) 2019; 12(20): e12203440.

Affiliation

Department of Clothing and Textiles, Pusan National University, Busan 46241, Korea. ljrj@pusan.ac.kr.

Copyright

(Copyright © 2019, MDPI: Multidisciplinary Digital Publishing Institute)

DOI

10.3390/ma12203440

PMID

31640163

Abstract

This paper presents the development and evaluation of fall-impact protection pants for elderly women using additive manufacturing. The protective pants were designed incorporating a protective pad in the hip area to reduce the impact of falls on the human body. The protective pad is a 3D mesh structure with a curved surface to fit the human body. Pads printed with flexible thermoplastic polyurethane were combined with foam to create the final pad. The impact-absorbing performance of the pad was verified through physical impact experiments. When dropping a bowling ball onto the protective pad from heights of 15, 20, and 25 cm, the protective pad was found to reduce the impact force by more than 82% in all cases. The impact force was less than the average fracture threshold of 3472 N. A subject group and an expert group evaluated the appearance, pad characteristics, motion functionality, and the wearability of the protection pants. Despite the insertion of a pad, the pants appeared natural and had a good fit. The pads were evaluated as being well-designed in terms of their position, shape, area, thickness, weight, flexibility, ease of insertion, and ease of use. Users were comfortable performing various motions when wearing the designed protective clothing. Therefore, this work can be considered to have developed protective clothing that provides satisfactory impact-protection performance and comfort thereby advancing the possibility of applying additive manufacturing to the creation of functional garments.

Language: en

Keywords

additive manufacturing; design; fall-impact protection; protection pad; protective pants