Citation

Arvidson M. Fire Technol. 2018; 54(5): 1265-1282.

Copyright

(Copyright © 2018, Holtzbrinck Springer Nature Publishing Group)

DOI

10.1007/s10694-018-0729-8

PMID

unavailable

Abstract

The response time of fire sprinklers is essential for their performance, especially in applications where life safety protection is desired. The earlier the sprinkler activates, the smaller the size of the fire. Most commercial residential sprinklers are fitted with 3 mm, 68°C glass bulbs. However, thinner sprinkler glass bulbs with lower operating temperatures are available. The aim of this study was to determine the response time--and the corresponding heat release rate--of different glass bulbs in a residential room fire scenario. A series of tests were conducted inside a compartment measuring 3.66 m by 3.66 m having a ceiling height of 2.5 m. The compartment was either enclosed or had two walls removed to provide a more ventilated scenario. A propane gas burner was positioned at one of the corners. The mass flow rate of the gas was controlled such that either 'slow', 'medium' or 'fast' fire growth rate scenarios were simulated. In each test, nine Response Time Index (RTI) and operating temperature combinations were tested. Each test was replicated three times. In addition, two commercial fire detectors were tested. The results show that the fire is considerably smaller upon activation with a combination of a low RTI and a low operating temperature, as compared to the 3 mm, 68°C glass bulb typically used for residential sprinklers. The operating temperature proved to have a larger impact on the results than the RTI. The heat from the fire was typically detected by the fire detectors prior to the activation of the sprinkler glass bulbs, especially for the 'slow' and 'medium' fire growth rate scenarios.

Language: en

Keywords

Fire detectors; Operating temperature; Residential room fire scenario; Response time; Response Time Index (RTI); Sprinkler glass bulbs