Citation

Remennikov A, Ngo T, Mohotti D, Uy B, Netherton M. Int. J. Impact Eng. 2017; 101: 78-89.

Copyright

(Copyright © 2017, Elsevier Publishing)

DOI

10.1016/j.ijimpeng.2016.11.013

PMID

unavailable

Abstract

Detonations of nitromethane spherical charges have been carried out to study close-in blast loading of steel plates and the effectiveness of several protective solutions. Three types of bare steel plates, namely mild steel, high-strength steel, and stainless steel were subjected to explosive blast loading. Steel plates of the same type with polyurea coating and composite covers were also subjected to localized blast loading. During an explosive field trial, the blast pressures and displacements of steel plates were measured. Additionally, loading of steel plates by the impinging detonation products was captured by high-speed video recordings. This experimental program has produced results which can be used to calibrate numerical models and to refine the simplified models for predicting blast loads and response of structural elements due to close-in detonations. The effectiveness of polyurea coating for enhancing blast protection of steel plated structures is discussed. The engineering-level model for predicting the blast impact impulse of the detonation gases from the charges in close proximity from the target is introduced and validated using the experimental results obtained during the course of the explosive trials.

Language: en

Keywords

Impulsive loading; Liquid explosive; Near-field blast; Protective design