Citation

Ellis PFM. Int. J. Wildland Fire 2015; 24(2): 225-235.

Copyright

(Copyright © 2015, International Association of Wildland Fire, Fire Research Institute, Publisher CSIRO Publishing)

DOI

10.1071/WF14048

PMID

unavailable

Abstract

Ignition probability of litter of dry-eucalypt forest by standard flaming and glowing firebrand samples was tested in a wind tunnel. Standard flaming firebrands were sections of bamboo sate stick 50 mm long, and flamed for ~9 s in still air. Standard glowing samples were sections of shed bark of Eucalyptus globulus 50 mm long, 15 mm wide and ~2 mm in thickness. These were burnt at their terminal velocities and at deposition had a mean mass of 0.2 g and would remain glowing for 2.5 min in wind. Ignition was tested using air speeds of zero, 1 and 2 m s-1, and oven-dried fuel moisture contents between 4 and 21%. For flaming samples, ignition probability was insensitive to variation in fuel and airflow characteristics and was a function of wind (no wind or wind) and fuel moisture content. For glowing samples, ignition probability was a function of fuel moisture content and wind speed. The models confirm the dominating influence of fuel moisture, are consistent with expert observations in the field and provide a practical measure of ignition likelihood by firebrands. It is argued that airflow turbulence and relative humidity are potentially significant for ignition by glowing firebrands.

Language: en