Citation

Forthofer JM, Butler BW, Wagenbrenner NS. Int. J. Wildland Fire 2014; 23(7): 969-981.

Copyright

(Copyright © 2014, International Association of Wildland Fire, Fire Research Institute, Publisher CSIRO Publishing)

DOI

10.1071/WF12089

PMID

unavailable

Abstract

For this study three types of wind models have been defined for simulating surface wind flow in support of wildland fire management: (1) a uniform wind field (typically acquired from coarse-resolution (~4km) weather service forecast models); (2) a newly developed mass-conserving model and (3) a newly developed mass and momentum-conserving model (referred to as the momentum-conserving model). The technical foundation for the two new modelling approaches is described, simulated surface wind fields are compared to field measurements, and the sensitivity of the new model types to mesh resolution and aspect ratio (second type only) is discussed. Both of the newly developed models assume neutral stability and are designed to be run by casual users on standard personal computers. Simulation times vary from a few seconds for the mass-conserving model to ~1h for the momentum-conserving model using consumer-grade computers. Applications for this technology include use in real-time fire spread prediction models to support fire management activities, mapping local wind fields to identify areas of concern for firefighter safety and exploring best-case weather scenarios to achieve prescribed fire objectives. Both models performed best on the upwind side and top of terrain features and had reduced accuracy on the lee side. The momentum-conserving model performed better than the mass-conserving model on the lee side.

Language: en