Citation

Benini C, Gadola M, Chindamo D, Uberti S, Marchesin FP, Barbosa RS. Veh. Syst. Dyn. 2017; 55(3): 338-350.

Copyright

(Copyright © 2017, Informa - Taylor and Francis Group)

DOI

10.1080/00423114.2016.1267370

PMID

unavailable

Abstract

This work analyses the effect of friction in suspension components on a race car vertical dynamics. It is a matter of fact that race cars aim at maximising their performance, focusing the attention mostly on aerodynamics and suspension tuning: suspension vertical and rolling stiffness and damping are parameters to be taken into account for an optimal setup. Furthermore, friction in suspension components must not be ignored. After a test session carried out with a F4 on a Four Poster rig, friction was detected on the front suspension. The real data gathered allow the validation of an analytical model with friction, confirming that its influence is relevant for low frequency values closed to the car pitch natural frequency. Finally, some setup proposals are presented to describe what should be done on actual race cars in order to correct vehicle behaviour when friction occurs.

Language: en

Keywords

validation; friction; Passive suspension; suspension system