Citation

Zhao ZG, Chen HJ, Zhen ZX, Yang YY. Veh. Syst. Dyn. 2014; 52(6): 776-801.

Copyright

(Copyright © 2014, Informa - Taylor and Francis Group)

DOI

10.1080/00423114.2014.902084

PMID

unavailable

Abstract

As for the self-developed six-speed dry dual-clutch transmission (DCT), the optimal torque-coordinated control strategy between engine and dual clutches is proposed to resolve the problem of launching with twin clutches simultaneously involved based on the minimum value principle. Focusing on the sliding friction phase of the launching process, dynamics equations of dry DCT with two intermediate shafts are firstly established, and then the optimal transmitting torque variation rate and the driven plate's rotating speed of dual clutches are deduced by using the minimum value principle, in which the jerk intensity and friction work are taken as the performance indexes, and the terminal constraints of state variables are determined according to the driver's launching intention. Besides, the separating conditions of non-target gear clutch and the torque distributing relations of twin clutches are derived from the launching control targets that guarantee the approximately equal friction extent of two clutches and no power cycle. After the synchronisation of driving and driven plates of on-coming clutch, the output torque of engine is smoothly switched to the driver's demand level. Furthermore, launching the simulation model of the dry DCT vehicle is set up on the Matlab/Simulink platform. Simulation results indicate that the proposed launching control strategy not only can effectively reflect the driver's intention and extend the life span of twin clutches, but also obtain an excellent launching quality. Finally, the torque control laws of two clutches obtained through the simulation are transformed into clutch position control laws for the future realisation in the real car, and the closed-loop position controls of twin clutches in the launching process are conducted on the test bench with two sets of clutch actuator, obtaining preferable tracking effects.