Citation

Jacobs PG, Wan EA, Schafermeyer E, Adenwala F, Paul AS, Preiser N, Kayez J. Conf. Proc. IEEE Eng. Med. Biol. Soc. 2014; 2014: 914-917.

Copyright

(Copyright © 2014, IEEE (Institute of Electrical and Electronics Engineers))

DOI

10.1109/EMBC.2014.6943740

PMID

25570108

Abstract

In this paper we present a new method for passively measuring walking speed using a small array of radio transceivers positioned on the walls of a hallway within a home. As a person walks between a radio transmitter and a receiver, the received signal strength (RSS) detected by the receiver changes in a repeatable pattern that may be used to estimate walking speed without the need for the person to wear any monitoring device. The transceivers are arranged as an array of 4 with a known distance between the array elements. Walking past the first pair of transceivers will cause a peak followed by a second peak when the person passes the second pair of transceivers. The time difference between these peaks is used to estimate walking speed directly. We further show that it is possible to estimate the walking speed by correlating the shape of the signal using a single pair of transceivers positioned across from each other in a hallway or doorframe. RMSE performance was less than 15 cm/s using a 2-element array, and less than 8 cm/s using a 4-element array relative to a gait mat used for ground truth.

Language: en