Citation

Vahdat N, Delaney R. Am. Ind. Hyg. Assoc. J. 1989; 50(3): 152-156.

Affiliation

Chemical Engineering Department, Tuskegee University, AL 36088.

Copyright

(Copyright © 1989, American Industrial Hygiene Association)

DOI

unavailable

PMID

2718908

Abstract

This study explored decontamination procedures for removing some organic solvents from protective clothing. The permeation experiments were performed on new and decontaminated specimens in seven polymer/chemical pairs. The decontamination methods investigated were thermal decontamination and air drying at room temperatures followed by detergent washing. Breakthrough time and steady-state permeation rate were determined by two different methods for new and decontaminated materials. The results showed that unless the contamination is limited to the outside surface of an elastomer (a material found in most barrier fabrics used in chemical protective clothing) or the chemical has a very large diffusion coefficient in the material, aeration and washing with detergent may not be an effective decontamination procedure for the type of solvent studied. On the other hand, thermal decontamination was shown to be effective in removing the contaminant from the matrix of the elastomers, and the decontaminated materials had permeation parameters similar to the new materials.

Language: en