Citation

Brunner D, Lemoine G, Bruzzone L. IEEE Trans. Geosci. Remote Sens. 2010; 48(5): 2403-2420.

Copyright

(Copyright © 2010, IEEE (Institute of Electrical and Electronics Engineers))

DOI

10.1109/TGRS.2009.2038274

PMID

unavailable

Abstract

Rapid damage assessment after natural disasters (e.g., earthquakes) and violent conflicts (e.g., war-related destruction) is crucial for initiating effective emergency response actions. Remote-sensing satellites equipped with very high spatial resolution (VHR) multispectral and synthetic aperture radar (SAR) imaging sensors can provide vital information due to their ability to map the affected areas with high geometric precision and in an uncensored manner. In this paper, we present a novel method that detects buildings destroyed in an earthquake using pre-event VHR optical and post-event detected VHR SAR imagery. The method operates at the level of individual buildings and assumes that they have a rectangular footprint and are isolated. First, the 3-D parameters of a building are estimated from the pre-event optical imagery. Second, the building information and the acquisition parameters of the VHR SAR scene are used to predict the expected signature of the building in the post-event SAR scene assuming that it is not affected by the event. Third, the similarity between the predicted image and the actual SAR image is analyzed. If the similarity is high, the building is likely to be still intact, whereas a low similarity indicates that the building is destroyed. A similarity threshold is used to classify the buildings. We demonstrate the feasibility and the effectiveness of the method for a subset of the town of Yingxiu, China, which was heavily damaged in the Sichuan earthquake of May 12, 2008. For the experiment, we use QuickBird and WorldView-1 optical imagery, and TerraSAR-X and COSMO-SkyMed SAR data. 2010 IEEE.