Citation

McGinnis RS, Perkins NC. Sensors (Basel) 2012; 12(9): 11933-11945.

Affiliation

Mechanical Engineering, University of Michigan, 2350 Hayward St., Ann Arbor, MI 48105, USA; E-Mail: ncp@umich.edu.

Copyright

(Copyright © 2012, MDPI: Multidisciplinary Digital Publishing Institute)

DOI

10.3390/s120911933

PMID

23112691

Abstract

Baseball and softball pitch types are distinguished by the path and speed of the ball which, in turn, are determined by the angular velocity of the ball and the velocity of the ball center at the instant of release from the pitcher's hand. While radar guns and video-based motion capture (mocap) resolve ball speed, they provide little information about how the angular velocity of the ball and the velocity of the ball center develop and change during the throwing motion. Moreover, mocap requires measurements in a controlled lab environment and by a skilled technician. This study addresses these shortcomings by introducing a highly miniaturized, wireless inertial measurement unit (IMU) that is embedded in both baseballs and softballs. The resulting "ball-embedded" sensor resolves ball dynamics right on the field of play. Experimental results from ten pitches, five thrown by one softball pitcher and five by one baseball pitcher, demonstrate that this sensor technology can deduce the magnitude and direction of the ball's velocity at release to within 4.6% of measurements made using standard mocap. Moreover, the IMU directly measures the angular velocity of the ball, which further enables the analysis of different pitch types.

Language: en