Citation

Pletz M, Daves W, Ossberger H. Proc. Inst. Mech. Eng. Pt. F J. Rail Rapid Transit 2012; 226(6): 603-611.

Copyright

(Copyright © 2012, Institution of Mechanical Engineers, Publisher SAGE Publishing)

DOI

10.1177/0954409712448038

PMID

unavailable

Abstract

A finite element model for the process of a wheel passing a crossing is presented. In the dynamic model, one wheel, the wing rails and the crossing nose (frog) are modelled. The bogie, the complete wheel set and the support of the crossing are represented as a system consisting of masses, springs, dampers and friction-generating elements. The rolling/sliding behaviour between the wheel and crossing is studied using the proposed model. Due to the conical shape of the wheel tread and multiple contacts between the wheel and the crossing parts, sliding occurs during the transition of the wheel from the wing rail to the crossing nose or vice versa. At the same time, an impact occurs that produces high contact forces. The parameters of the model are the train speed and passing direction, the wheel and the crossing geometry, the axle load and the support of the crossing. In this paper, the crossover process is studied for high axle loads and compared with results of simulations using a normal axle load. Further parameters are three train velocities, both directions of passing and different crossing materials. The loading of the crossing nose is calculated for all cases (axle load, train speed and direction) and materials.

Language: en