Citation

Persson I, Nilsson R, Bik U, Lundgren M, Iwnicki S. Veh. Syst. Dyn. 2010; 48(Suppl 1): 89-104.

Copyright

(Copyright © 2010, Informa - Taylor and Francis Group)

DOI

10.1080/00423111003668245

PMID

unavailable

Abstract

In this paper, a genetic algorithm optimisation method has been used to develop an improved rail profile for Stockholm underground. An inverted penalty index based on a number of key performance parameters was generated as a fitness function and vehicle dynamics simulations were carried out with the multibody simulation package Gensys. The effectiveness of each profile produced by the genetic algorithm was assessed using the roulette wheel method. The method has been applied to the rail profile on the Stockholm underground, where problems with rolling contact fatigue on wheels and rails are currently managed by grinding. From a starting point of the original BV50 and the UIC60 rail profiles, an optimised rail profile with some shoulder relief has been produced. The optimised profile seems similar to measured rail profiles on the Stockholm underground network and although initial grinding is required, maintenance of the profile will probably not require further grinding.