Citation

Chollet H. Veh. Syst. Dyn. 2012; 50(1): 133-148.

Copyright

(Copyright © 2012, Informa - Taylor and Francis Group)

DOI

10.1080/00423114.2011.575945

PMID

unavailable

Abstract

A project on the pavement-rutting evolution under the effect of a tram on tyre, led the author to make a link between road and railway approaches to the problem of rolling contact. A simplified model is proposed with a fine description of the contact patch between a tyre and the road, and a more realistic pressure and shear stresses distribution than that available from basic models previously available. Experimental measurements are used to identify some characteristics of the force description, while the geometric shape of the tyre-road section are used, like in the traditional rail-wheel contact models, to build the 3D model. The last part validates a plausible contact pressure shape from self-aligning torque measurements and from Kalker's contact stresses gradient applied to the real tyre used in the project. The final result is a brush model extended from the wheel-rail STRIPES one, applicable to dynamics or contact studies of real tyres, with a physical coupling between longitudinal, lateral and spin effects, and a relatively fine description of the contact stresses along each strip of each tyre of the vehicle on an uneven road.