Citation

Munoz M, Planas E, Ferrero F, Casal J. J. Hazard. Mater. 2007; 144(3): 725-729.

Affiliation

Centre d'Estudis del Risc Tecnològic, Department of Chemical Engineering, Universitat Politècnica de Catalunya, Diagonal 647, 08028-Barcelona, Catalonia, Spain.

Copyright

(Copyright © 2007, Elsevier Publishing)

DOI

10.1016/j.jhazmat.2007.01.121

PMID

17363158

Abstract

The emissive power (E) of a flame depends on the size of the fire and the type of fuel. In fact, it changes significantly over the flame surface: the zones of luminous flame have high emittance, while those covered by smoke have low E values. The emissive power of each zone (that is, the luminous or clear flame and the non-luminous or smoky flame) and the portion of total flame area they occupy must be assessed when a two-zone model is used. In this study, data obtained from an experimental set-up were used to estimate the emissive power of fires and its behaviour as a function of pool size. The experiments were performed using gasoline and diesel oil as fuel. Five concentric circular pools (1.5, 3, 4, 5 and 6m in diameter) were used. Appropriate instruments were employed to determine the main features of the fires. By superimposing IR and VHS images it was possible to accurately identify the luminous and non-luminous zones of the fire. Mathematical expressions were obtained that give a more accurate prediction of E(lum), E(soot) and the average emissive power of a fire as a function of its luminous and smoky zones. These expressions can be used in a two-zone model to obtain a better prediction of the thermal radiation. The value of the radiative fraction was determined from the thermal flux measured with radiometers. An expression is also proposed for estimating the radiative fraction.

Language: en