Citation

Ferdous R, Khan F, Veitch B, Amyotte PR. Process. Saf. Environ. Prot. 2009; 87(4): 217-226.

Copyright

(Copyright © 2009, Institution of Chemical Engineers and European Federation of Chemical Engineering, Publisher Hemisphere Publishing)

DOI

10.1016/j.psep.2009.04.004

PMID

unavailable

Abstract

Probabilistic risk assessment (PRA) is a comprehensive, structured and logical analysis method aimed at identifying and assessing risks of complex process systems. PRA uses fault tree analysis (FTA) as a tool to identify basic causes leading to an undesired event, to represent logical dependency of these basic causes in leading to the event, and finally to calculate the probability of occurrence of this event.

To conduct a quantitative fault tree analysis, one needs a fault tree along with failure data of the basic events (components). Sometimes it is difficult to have an exact estimation of the failure rate of individual components or the probability of occurrence of undesired events due to a lack of sufficient data. Further, due to imprecision in basic failure data, the overall result may be questionable. To avoid such conditions, a fuzzy approach may be used with the FTA technique. This reduces the ambiguity and imprecision arising out of subjectivity of the data.

This paper presents a methodology for a fuzzy based computer-aided fault tree analysis tool. The methodology is developed using a systematic approach of fault tree development, minimal cut sets determination and probability analysis. Further, it uses static and dynamic structuring and modeling, fuzzy based probability analysis and sensitivity analysis.

This paper also illustrates with a case study the use of a fuzzy weighted index and cutsets importance measure in sensitivity analysis (for system probabilistic risk analysis) and design modification.