Citation

Tewari VK, Prasad N. Ergonomics 2000; 43(2): 167-186.

Affiliation

Agricultural and Food Engineering Department, Indian Institute of Technology, Kharagpur, India. vktfeb@agfe.iitkgp.ernet.in

Copyright

(Copyright © 2000, Informa - Taylor and Francis Group)

DOI

10.1080/001401300184549

PMID

10675057

Abstract

An experimental set up was fabricated to measure the pressure distribution on the seat pan and back-rest of a tractor seat. Experiments were conducted with four different seat pans having radius of curvatures of 60, 75, 90 and infinity cm, four back-rests with radius of curvatures of 30, 60, 90 and infinitity cm, and three back-rest inclinations of 0 degrees , 5 degrees and 10 degrees on representative Indian tractor operators. The subjective assessment of perceived comfort at the seat-operator interface was also recorded. Experiments were conducted in a randomized block design and the data obtained were analysed using suitable computer packages. Results indicate that all the parameters, namely seat pan, back-rest profile curvatures and the back-rest angle of inclination, affect the pressure distribution. It is concluded that a seat pan with radius of curvature 75 cm, back-rest with radius of curvature 30 cm and back-rest inclination of 10 degrees are the most suitable parameters for Indian tractor operators.

Language: en