Citation

King AI. Annu. Rev. Biomed. Eng. 2001; 3: 27-55.

Affiliation

Bioengineering Center, Wayne State University, Detroit, Michigan 48202, USA. king@rrb.eng.wayne.edu

Copyright

(Copyright © 2001, Annual Reviews)

DOI

10.1146/annurev.bioeng.3.1.27

PMID

11447056

Abstract

This is the second of two chapters (the first chapter appeared in the Annual Review of Biomedical Engineering, 2000, 2:55-81) dealing with some 60 years of accumulated knowledge in the field of impact biomechanics. The regions covered in the first chapter were the head, neck, and thorax. In this chapter, the abdomen, pelvis, and lower extremities are discussed. The thoracolumbar spine is not covered because of length limitations and the low frequency of injury to this area from automotive accidents. Again, in the cited results, the reader needs to be keenly aware of the wide variation in human response and tolerance. This is due primarily to the large biological variations among humans and to the effects of aging. Average values that are useful in design cannot be applied to individuals.

Language: en