Citation

Hwang C, Lock A, Bundy M, Johnsson E, Gwon Hyun Ko . J. Fire Sci. 2010; 28(5): 459-486.

Copyright

(Copyright © 2010, SAGE Publishing)

DOI

10.1177/0734904110363106

PMID

unavailable

Abstract

An experimental study was conducted to investigate the thermal, chemical, and flow environments of heptane fires in an ISO 9705 room. Fuel flow rates and vent size were manipulated to create overventilated fire (OVF) and underventilated fire (UVF) conditions. Numerical simulations were also performed, for the same conditions, with the Fire Dynamics Simulator (FDS) developed at the National Institute of Standards and Technology. Both OVF and UVF conditions were characterized with temperature distributions, and combustion product formation measured locally in the upper layer, as well as combustion efficiency and global equivalence ratio. It was shown that the numerical results agree quantitatively with measurements in both OVF and UVF. The internal flow pattern rotated in the opposite direction for the UVF relative to the OVF so that a portion of products recirculated to the inside of compartment. This flow pattern may affect changes in the complex processes of CO and soot formation inside the compartment due to an increase in the residence time of high-temperature products. The 3D flow structures including O₂ and CO distribution were visualized inside the underventilated compartment fire using FDS. It was observed that the two gas sample locations in the upper layer of the room were insufficient to completely characterize the internal structure of the compartment fire.