Citation

Leger P, Seydou S. J. Perform. Constr. Facil. 2009; 23(3): 166-174.

Copyright

(Copyright © 2009, American Society of Civil Engineers)

DOI

10.1061/(ASCE)0887-3828(2009)23:3(166)

PMID

unavailable

Abstract

Seasonal temperature displacements are an important component of the total displacements recorded by pendulum measurements at gravity dams located in northern regions. A hybrid dam displacement model is presented in this paper to interpret these displacements and extrapolate the response for an extreme thermal event not yet experienced by the dam. The hybrid model uses a simplified deterministic structural dam representation with beam elements in complement to a hydrostatic seasonal time (HST) statistical displacement model. Comparisons are first established between 1D heat transfer analyses of typical gravity dam sections, and 2D finite-element (FE) analyses. Thermomechanical displacements are compared to show the validity of the proposed simplified deterministic beam model for typical dams. A case study of an actual 40 m gravity dam located in Quebec, Canada is then presented. It is shown that the deterministic model can be calibrated using the pendulum displacements and the HST model. The calibrated deterministic model is then used to extrapolate the displacement response for extreme thermal events not yet experienced by the dam. The proposed methodology represents a simple extension of the gravity method, widely used to verify gravity dam stability, as a first step to interpret recorded pendulum displacements and set appropriate warning and alarm levels on a rational basis before developing 2D and 3D thermomechanical FE deterministic dam models that require a lot of resources and expertise to be used effectively.