Citation

Dong YL, Zhu EC, Prasad K. Fire Safety J. 2009; 44(4): 439-450.

Copyright

(Copyright © 2009, Elsevier Publishing)

DOI

10.1016/j.firesaf.2008.09.005

PMID

unavailable

Abstract

The collapse of the World Trade Center Towers and other recent fires in tall buildings has motivated this study to understand the performance of structural frames under fire loading. Three two-storey, two-bay composite steel frames were constructed and subjected to dead loads by applying weight blocks, and to thermal load by placing the frame in a furnace. The furnace was specially designed to allow for controlled heating of the structural elements that formed the four compartments of the test frame. This paper describes the experimental results of furnace test conducted on the three full-scale composite frames. The three tests differed from each other in the number and location of compartments that were heated by the furnace. For each test, the structural elements were subjected to a heating-up phase followed by a cooling-down phase. The furnace temperatures and the steel and concrete temperatures recorded during the test are presented. The thermally induced horizontal displacements of the columns and vertical deflections of the composite beams are discussed. Observations on local buckling of the steel beam, cracking of the concrete slab and failure of the beam-to-column connections are tabulated. Experimental results of the three tests are compared with each other by studying the complete deformation process of the test frames over time. Results indicate that the deformation process of the test frames was highly dependent on the number and location of compartments that were subjected to thermal loading. Keywords: Composite steel frame; Test; Thermal load; Furnace heating; Structural failure