Citation

Nguyen TD, Meftah F, Chammas R, Mebarki A. Fire Safety J. 2009; 44(4): 629-641.

Copyright

(Copyright © 2009, Elsevier Publishing)

DOI

10.1016/j.firesaf.2008.12.006

PMID

unavailable

Abstract

A thermo-mechanical model is adopted in order to investigate the fire behaviour of clay masonry walls. In this analysis, conductive, convective and radiative thermal transfers are considered together with local energy consumption due to phase changes. These latter are essentially initiated by both the vaporisation of adsorbed water and the chemical transformation of clay under rising temperatures. Therefore, experimental tests at both the material scale and the brick scale are performed in order to identify the parameters that characterise the thermo-hygral behaviour of clay. For this purpose, numerical simulations are carried out on the experimentally tested hollow bricks in order to determine by back analysis these material parameters. The thermal model being validated, the thermo-mechanical behaviour of a masonry wall subjected to fire, is thereafter investigated by adopting a full three-dimensional finite-element analysis. Numerical simulations results are compared to the experimentally measured ones in terms of both temperature and out-of plane displacement fields. In this analysis, it is shown that a non-linear elastic behaviour for bricks and mortar with temperature-dependent mechanical parameters is sufficient to retrieve the overall behaviour of thin masonry walls. Finally, a parametric study provides the influence of each material parameter on the fire behaviour of the partition walls. Keywords: Fire resistance; Clay masonry; Brick; Mortar; Finite element